Bosch Dishwasher Stuck On Auto – Causes & Solutions

Owning a Bosch dishwasher is a dream come true for many homeowners. They are known for their quiet performance, durability, and sleek design.

However, what happens when your dishwasher stops working and is stuck on Auto? It can be a horrible experience, but don’t worry; we are here to help.

Reasons For Bosch Dishwasher Stuck On Auto

In this post, we will explore the causes of this problem and provide you with a solution. Keep reading to learn more.

How To Fix A Bosch Dishwasher Stuck On Auto

Check The Water Inlet Hose To Be Sure It Is Not Kinked Or Frozen

There are several possible causes for a Bosch dishwasher to become stuck on the Auto setting.

The water intake hose frequently becomes clogged, one of the most prevalent causes.

It can be caused by sediment buildup or other debris, preventing the dishwasher from adequately filling with water.

Another potential cause is a faulty water inlet valve.

This valve controls the water flow into the dishwasher; if it is damaged or not functioning correctly, it can cause the dishwasher to become stuck on Auto.

If your Bosch dishwasher becomes stuck on Auto, there are a few things you can do to try and fix the problem.

First, check the water inlet hose for any blockages. If you find any, clean them out and see if that fixes the problem.

If this is not the situation, the water entry valve might need to be replaced.

So, to accomplish this, you will need to disconnect the intake hose from the dishwasher and turn off the water supply connected to it.

After that, you should take out the worn-out valve and replace it with a brand-new one.

Once you have done this, reconnect the inlet hose and turn on the water supply. Finally, run a test cycle to see if the problem has been fixed.

Check The Power Supply To Be Sure The Dishwasher Is Receiving Enough Power

A few things can cause your Bosch dishwasher to get stuck on the auto setting. One of the most common reasons is a power supply issue.

If the dishwasher isn’t getting enough power, it can cause it to get stuck on Auto.

You Can Attempt The Following Procedures To Resolve A Power Supply Issue

  1. Check the power cord and ensure it’s securely plugged into the outlet.
  2. Check the circuit breaker and make sure it hasn’t tripped.
  3. If you have a multi-meter, you can check the voltage at the outlet to see if it’s within the range that the dishwasher needs.
  4. When none of the procedures above are successful, you will likely need to contact an electrician to examine the wiring and ensure that everything complies with the standards.

Clean The Filters To Be Sure They Are Not Blocked With Food Or Grease

Filters blocked with food or grease cause why Bosch Dishwasher to get Stuck On Auto and steps to fix it.

Steps To Clean Filters Block With Food Or Grease In Bosch Dishwasher

  1. Remove the blockage from the filters using a toothpick or other sharp object.
  2. Clean the filters with hot, soapy water.
  3. Rinse the filters well and reinstall them.
  4. Run the dishwasher through a cycle to ensure it works properly.

Check The Water Pump

Water pump problems are common reasons a Bosch dishwasher can become stuck on the auto cycle.

If the water pump is not working correctly, it can cause the dishwasher to fill up with water and become stuck.

To fix this problem, you will need to replace the water pump.

Bosch Dishwasher Stuck On Auto

The Following Steps Will Guide You Through The Process Of Replacing The Water Pump

  1. Remove the plug that connects the dishwasher to the power socket.
  2. Remove the lower panel of the dishwasher by unscrewing the screws that hold it in place.
  3. Locate the water pump on the left side of the dishwasher. The water pump is usually held in place by two screws.
  4. Remove the screws that hold the water pump in place and carefully remove the water pump.
  5. Install the new water pump by reversing the steps you used to remove the old water pump.
  6. Screw the new water pump in place and reattach the lower panel of the dishwasher.
  7. Plug the dishwasher back into the power outlet and turn it on.

The Dishwasher May Be Overfilling

Overfilling your Bosch dishwasher can cause the “auto” function to become stuck. To fix this, empty some of the dishwasher’s water and restart it.

You may also need to run a cycle with just water to clear out any soap buildup causing the issue.

How To Handle An Overfilling Bosch Dishwasher

If your Bosch dishwasher is overfilling, you should empty some of the water first.

You can do this by tipping the dishwasher to one side or using a cup or pitcher to remove the water.

Once you’ve removed some water, restart the dishwasher and see if the “auto” function is still stuck.

If it is, you may need to run a cycle with just water to clear out any soap buildup that could be causing the issue.

The Dishwasher Doesn’t Have Enough Water Pressure

If your Bosch dishwasher doesn’t seem to be getting enough water pressure, there are a few possible causes.

First, ensure that the valve controlling the amount of water that enters the system is fully open. If it’s not, turn it counterclockwise until it is.

Next, clean the inlet screen to remove debris blocking the water flow. Finally, check the water supply line to ensure it’s not kinked or otherwise secured.

The Control Panel Is Not Working Properly

A few things might be causing your Bosch dishwasher’s control panel to malfunction, so it’s important to rule out each possibility.

It provides a list of actions that you may do to solve the problem:

  1. Confirm that the dishwasher is turned on and the power wire is plugged into an outlet.
  2. If the display is not lit up, check that the fuse hasn’t blown and that power is going to the dishwasher.
  3. If the buttons on the control panel are not responding, try cleaning them with a damp cloth.
  4. It would be best to get a new control panel when none of the above remedies work.

Check The Plug

You can perform simple steps to fix the problem, such as unplugging the dishwasher and reconnecting the power cord.

First, check that your fuse is in good condition. If not, replace it with a new one and try restarting the dishwasher.

If that doesn’t work, try unplugging the dishwasher for a few minutes and then plugging it back in.

Finally, if all those solutions fail, you may need to call a repair specialist.

Conclusion

If you are experiencing the same issue with your dishwasher, carefully follow the steps provided.

With some troubleshooting, you should be able to get your machine back up and running like a new one in no time.

Have any other questions about your Bosch dishwasher? Feel free to post a comment, and we will get back to you as quickly as possible.

How useful was this post?

Click on a star to rate it!

Average rating 3.7 / 5. Vote count: 3

No votes so far! Be the first to rate this post.

Avatar of Luis

I am a professional appliance repair expert and write articles that help average users diagnose and troubleshoot their kitchen gadgets, like microwaves, dishwashers, etc. I’m a foodie by heart and love reviewing food recipes, ingredients, and the cookware products used in them for meal preparation.