Bosch Dishwasher Soap Dispenser Not Opening – Causes & Solutions

It might be infuriating if the soap dispenser on your Bosch dishwasher does not open.

However, with little research and perseverance, you should be able to solve the problem independently.

Reasons And Solutions To Bosch Dishwasher Soap Dispenser Not Opening

Therefore in the post, we will show how to repair a Bosch dishwasher soap dispenser that is seized in a closed state and will not open.

In addition, we will provide you with some advice on preventative maintenance that you may use to ensure that your dishwasher continues to operate efficiently.

Dishwasher Soap Dispenser Not Opening – Common Causes And Solutions

Soap Dispenser Is Clogged

One of the primary reasons your Bosch dishwasher soap dispenser might not be opening is it’s clogged.

Filth and crud can accumulate over time in the dispenser, prohibiting the mechanism from functioning correctly.

To clean your soap dispenser, remove it from the dishwasher and rinse it with warm water.

If the dispenser is especially dirty, you can use mild soap to help loosen any build-up.

Once the dispenser is clean, reattach it to the dishwasher and test it out.

The latch or hinge could be an issue if your soap dispenser is still not opening. Check whether one of these parts is broken or not functioning correctly.

If necessary, replace the latch or hinge with a new one.

The Spring That Opens The Soap Dispenser Door Is Broken

One possible reason why your Bosch dishwasher soap dispenser is not opening could be because the spring that opens the door is broken.

To fix this problem, you will need to replace the broken spring with a new one.

You can achieve this by removing the worn-out spring from the door and installing a fresh spring in its stead.

Once the new spring is in place, you should be able to open and close the door without any issues.

If the issue is not resolved, you might find it necessary to seek the aid of a specialist.

The Detergent Dispenser Is Not Compatible With The Dishwasher Model

If the soap dispenser for your Bosch dishwasher does not open, one of the most likely reasons is that it is not compatible with the model of your dishwasher.

You will need to look for a soap dispenser that is compatible with the model of the dishwasher you are using to resolve this issue.

You also can attempt to adapt the current soap dispenser to make it compatible with the model of your dishwasher.

The Water Inlet Valve Is Not Open

If the water inlet valve is not open, the first thing you should do is check to make sure that there is power to the dishwasher.

If there is no power, verify that the circuit breaker is not tripped and that there is power to the outlet. If there is power, check if the door switch is defective.

If the door switch is faulty, a replacement must be obtained.

Check the float switch if the water inlet valve is open but the dishwasher is not filling with water. The float switch is located inside the dishwasher near the bottom.

The float switch activates when it senses moisture in the bottom of the dishwasher. If the float switch is defective, it will need to be replaced.

The Dishwasher Is Not Level

Once your dishwasher is not level, it can cause the soap dispenser not to open. To fix this, you will need to level the dishwasher.

It may be accomplished by simply adjusting the dishwasher’s feet on the floor. Once the dishwasher is level, the soap dispenser should open correctly.

Bosch Dishwasher Soap Dispenser Not Opening

Is the detergent dispenser damaged or Defective?

If the dishwasher’s detergent dispenser is broken or not working correctly, it may prevent the soap dispenser from opening.

To resolve this, you will need to replace any components that are damaged or not working correctly.

You should be able to obtain new components at the hardware shop in your area.

After you have put the pieces back in their appropriate places, your dishwasher should be able to distribute soap accurately.

The Dishwasher Is Not Draining Properly

If your dishwasher is not draining correctly, it could be because the dishwasher soap dispenser is not opening.

To fix this, check the dispenser for any blockages or build-up of soap scum. Clean it out if you find any, and then try opening the dispenser again.

You may need to replace the dishwasher soap dispenser if the problem persists.

The Dishwasher Is Not On The Correct Cycle

If the dishwasher is not on the correct cycle, it can cause the dishwasher soap dispenser not to open.

To fix this:

  1. Ensure the dishwasher is on the correct cycle and the soap dispenser is correctly aligned with the opening.
  2. If the soap dispenser still does not open, try pressing down on the dispenser while the dishwasher is running.

The Dishwasher’s Thermostat Is Not Working

If your dishwasher’s thermostat is not working, this can cause the dishwasher soap dispenser not to open. To resolve this issue, you will need to replace the thermostat.

Steps To Replace The Dishwasher Thermostat

  1. First, locate the dishwasher thermostat and remove it from the dishwasher
  2. Next, take the new dishwasher thermostat and install it in the exact location as the old one
  3. Finally, test the new thermostat to ensure it works properly. If it is not, you may need to replace it with a new one.

If your dishwasher soap dispenser is still not opening after replacing the thermostat, another issue may be causing the problem.

Try troubleshooting other potential causes of the case before calling a maintenance specialist.

The Dishwasher’s Door Switch Is Not Working

If your dishwasher’s door switch is not working, it can cause the soap dispenser not to open. You’ll need to change the door switch to resolve this.

It is something that can be accomplished by following these steps:

  1. Disconnect the power to the dishwasher.
  2. Take off the screws that are holding the door switch to its position.
  3. Pull the door switch out of the hole.
  4. Insert the new door switch into the hole.
  5. Secure the door switch with screws.
  6. Reconnect the power to the dishwasher.

The Dispenser Cap Is Not Properly Installed

There are a few potential causes for the issue: the dishwasher will fill with water but will not empty it after it is finished.

First, make sure the drain pipe does not have any kinks or obstructions in it by inspecting it.

Second, inspect the waste disposal to ensure any obstructions are clear.

If the garbage disposal is blocked, you must unclog it before the dishwasher drains properly. Finally, check the drain pump to see if it is defective.

There will need to be a replacement drain pump in case the one in place is faulty.

Conclusion

We hope that this article has helped troubleshoot your Bosch dishwasher soap dispenser.

By following our steps, you should now be able to resolve the issue and get your dishwasher running smoothly again.

Consequently, if you have any more concerns or issues, please do not hesitate to contact us for assistance.

We are thrilled that you have chosen to go with Bosch.

How useful was this post?

Click on a star to rate it!

Average rating 4.2 / 5. Vote count: 5

No votes so far! Be the first to rate this post.

I am a professional appliance repair expert and write articles that help average users diagnose and troubleshoot their kitchen gadgets, like microwaves, dishwashers, etc. I’m a foodie by heart and love reviewing food recipes, ingredients, and the cookware products used in them for meal preparation.