Frigidaire Water Filter Stuck – Solution

If the Frigidaire water filter is stuck, there could be various reasons for this. Frigidaire filter, like other filters, have their own set of typical problems.

Causes Of Frigidaire Water Filter Stuck

One of the most common issues includes the filter being stuck and not working correctly. These difficulties, while inconvenient, are often quickly resolved with a little effort.

This article will discuss the potential causes and solutions for removing a stuck filter.

Causes & How Do I Get Rid Of It?

Let’s explore why your filter might be jammed and what you can do about it.

O Rings

O-rings are small but essential components of filters. They are located at the bottom of the filter housing and help to create a tight seal.

Over time, however, O-rings can become dry or damaged, causing the seal to break and allowing water to leak out.

If your filter for the Frigidaire water filtration system is locked, one potential reason is that the O-ring is no longer functioning correctly.


Replacing the O-ring in your clogged filter is a simple and effective way. It can fix the leak and stuck filter issue. To do this, purchase a new O-ring from a durable material such as silicone.

With the new O-ring in place, your filter should be good as new. If you have any questions about choosing or installing the new O-ring, be sure to consult with a licensed plumber.

Blocked Filter Housing

Another potential reason for a stuck water filter is that something might block the filter housing. It could be dirt, sediment, or even a small object that has made its way into the housing.

The cartridge is not correctly inserted into the housing, or sediments have accumulated. And it blocks the flow of water.

If something is blocking the housing, it will prevent the filter from being able to move correctly. It can eventually cause it to become locked.


The best way to remove a blockage from the filter housing is to use a plunger. Place the plunger over the opening of the housing and push and pull it until the blockage is removed.

If you can’t dislodge the blockage using a plunger, you’ll need a wire or pipe cleaner to clear it out. Be sure to exercise caution when doing this so that you do not damage the housing.

Moreover, the locking pin is located on the housing side and helps secure the filter. To fix this issue, push the pin back into place.

If the filter housing is damaged, it will need to be replaced before you can use the refrigerator for filtration.

If you have any questions about replacing your filter, be sure to consult with customer service.

Faulty Installation

Sometimes, your water filter isn’t functioning because it was installed incorrectly. If the filter is not installed correctly, it will not be able to move freely and may become stuck.

It is usually due to one of two issues:

  • The O-ring was not installed correctly.
  • The housing was not tightened properly.


If you believe your water cleaning filter is not working correctly because of an incorrect installation, the best thing to do is remove the filter and start over. Be sure to check that the O-ring is in place.

And the housing is tightened securely before reinstalling the filter. If you are still having trouble, it may be best to consult with a licensed plumber or customer service.

Frigidaire Water Filter Stuck

Water Pressure

High water pressure can also be the reason for a clogged filter in Frigidaire devices. If the water pressure in your home is too high, it can strain the filter.

It causes it to become locked. High pressure can also cause the filter to start leaking.

If left unchecked can eventually lead to the filter becoming completely locked.


To see if elevated pressure is the cause of your clogged Frigidaire filter, use a pressure-measuring gauge.

Water gauges measure the amount of force water exerts in a given area. They can measure water pressure in a pipe or on a surface.

These gauges are often used to help diagnose problems with plumbing.

Most homes have a water pressure of around 40 psi (pounds per square inch). If the pressure in your home is higher than this, you may need to install a pressure regulator.

It will help to reduce the amount of strain on your filter.

A licensed plumber or customer service can install a pressure regulator.

Frozen Filter

Freezing temperatures can be another source of a frozen filter. If the filter is exposed to freezing temperatures, the water inside can expand and cause the housing to crack.

It can lead to leaks and eventually cause problems in screwing the filter.


If you suspect your Frigidaire water cleaning filter is frozen, you should thaw it out as soon as possible. The best way to do this is to place the filter in a bowl of warm water.

Once it has thawed out, check for any cracks in the housing and replace the filter if necessary.

Dirty Filter

A Frigidaire filter often becomes stuck when it needs to be replaced due to dirt and grime build-up. Over time, the filter will become clogged with dirt and sediment, making it difficult to move.

If the filter is not replaced regularly, it can eventually become so clogged that it becomes stuck.


The best way to fix a dirty filter is to replace it with a new one. Be sure to follow the instructions in your owner’s manual.

Also, ensure that you are choosing the correct replacement filter. Once the new filter is in place, your clogged Frigidaire water filter should work correctly.

Frigidaire is a well-known brand of appliances, and their filters are no exception.

Frigidaire filtration systems are designed to remove impurities from your water, making it safer and more refreshing to drink.

However, like all filters, a Frigidaire filter will eventually become clogged and need to be replaced.

These are the most common causes of a clogged filter. If your filter is still having trouble after trying these solutions, it may be time to call a licensed plumber.

Key Takeaways

Before reinstalling the filter, double-check that the O-ring is in place and that the housing is tightened correctly.

  • The most common reason a Frigidaire water filter becomes blocked is an incorrect installation or high water pressure.
  • If high pressure is the cause of your stuck Frigidaire filter, use a pressure measure gauge.
  • A frozen filter can quickly damage your machine. So if you believe it to be frozen, thaw it out and check for cracks immediately. Replacing a dirty or old filter with a new one is the best way to keep your machine running smoothly.

l If none of these steps works, it’s time to call a professional plumber.

How useful was this post?

Click on a star to rate it!

Average rating 4 / 5. Vote count: 3

No votes so far! Be the first to rate this post.

Avatar of Luis

I am a professional appliance repair expert and write articles that help average users diagnose and troubleshoot their kitchen gadgets, like microwaves, dishwashers, etc. I’m a foodie by heart and love reviewing food recipes, ingredients, and the cookware products used in them for meal preparation.