Frigidaire Gallery Refrigerator Display – Common Problems

Have you been having problems with your Frigidaire Gallery refrigerator display? If so, you’re not alone!

In this blog post, we will look at some of the most common causes of Frigidaire Gallery refrigerator display problems.

Frigidaire Gallery Refrigerator Display Problems

In contrast, we will provide a few tips on identifying and correcting these problems. Therefore, continue reading to gain further knowledge.

All You Need To Know About Display Problems

When you first bought your Frigidaire Gallery refrigerator, the display worked perfectly.

But now, the display is acting up after months or even years of use. It’s hard to read, it flickers, and sometimes it even goes dark.

This display issue might have been caused by a few different things.

It could be a simple design defect that was never corrected. Or maybe the display is starting to fail due to wear and tear. Here below are display problems.

The display is dark. If your Frigidaire Gallery refrigerator’s display is dark, several potential causes exist.

First, check to see if the power cord is plugged in and if the outlet is working. If the power cord is plugged in and the outlet is working, the next step is to check the circuit breaker or fuse.

If the circuit breaker or fuse is tripped or blown, reset it or replace it as needed.

If the power cord and circuit breaker or fuse are both working, the next step is checking the display.

If the display is cracked or damaged, it will need to be replaced.

Display Is Frozen

Make sure that the temperature control is set to the correct setting. If it is, then the problem may be with the defrost timer.

Try resetting the defrost timer by unplugging the refrigerator for 30 minutes and then plugging it back in. The problem may be with the ice maker if that doesn’t work.

Try turning off the ice maker for 24 hours, then turning it back on. If the problem persists, call a qualified refrigerator technician for assistance.

Frigidaire Gallery refrigerator’s display is dim. There are a few likely causes. The first is that the fridge is not getting enough power.

Make sure the outlet the fridge is plugged into is working and that the cord is not damaged. The problem may be with the fridge itself if everything looks good there.

Examine the possibility that the issue is caused by cables not properly secured within the refrigerator. If you can’t find any loose wires, the display may need to be replaced.

Common Problems With Frigidaire Gallery Refrigerator Display

Display Is Flashing

If the display on your Frigidaire Gallery refrigerator is flashing, there could be a few different causes.

First, ensure that the refrigerator is properly plugged into a working outlet. If it is, the power cord is the next thing to check.

If the cord is damaged, it will need to be replaced. If the cord and outlet both seem to work properly, the next step is to check the control board.

The control board controls the display, so if it is damaged or not working properly, the display will not work either. Luckily, the control board is usually easy to replace.

Display Is Inaccurate

There are many potential causes of inaccurate refrigerator displays, including loose wiring, a bad sensor, or a software glitch. If your Frigidaire Gallery refrigerator’s display is inaccurate, check the following:

  1. Check the wiring. Make sure all connections are tight and secure.
  2. Check the sensor. If the sensor is dirty or damaged, it may cause the display to be inaccurate.
  3. Check for a software glitch. If the display is still inaccurate after checking the wiring and sensor, there may be a software issue. Try resetting the refrigerator. If the problem persists, contact Frigidaire customer service for assistance.

Electronic Control Board Failure

If you have a Frigidaire Gallery refrigerator with a digital display panel, you may experience some problems with the panel. One potential cause of display problems is the failure of the electronic control board.

The digital display screen is the function that is controlled by the electronic control board, which is responsible for handling all the operations of the refrigerator.

If the control board fails, it can cause the display panel to malfunction.

There are a few signs that the electronic control board may be failing. If the display panel starts to act erratically or stops working altogether, it’s possible that the control board is to blame.

If you suspect that the electronic control board is failing, it’s important to have the refrigerator serviced by a qualified technician.

Main Control Board Failure

If your Frigidaire Gallery refrigerator is having display problems, it could be due to a main control board failure.

The main control board is responsible for controlling all the refrigerator’s functions, including the display.

If the main control board fails, the display will not work. Main control board failures are usually caused by a power surge or by a short circuit.

If you have a power surge, you will need to replace the main control board. If you have a short circuit, you will need to have an electrician fix the problem.

Is the Display Showing Strange Characters or Lines?

One possibility is that the display is simply malfunctioning. If this is the case, you will need to contact Frigidaire customer service for assistance.

Another possibility is that there is something wrong with the electrical connection to the display. There may be an issue with the power source, or there may be a wire that is loose.

You should disconnect the refrigerator and inspect the connections if you have any reason to suspect that this may be the problem.

If the display issue continues, it is possible that an issue causes the problem with the control board.

The excellent thing is that there are certain actions you may take to make it less likely that similar problems will arise in the future.

Check to confirm that the refrigerator is properly connected to an electrical outlet as the first step in the process. It is possible that the display will not function correctly if the refrigerator is not properly plugged in.

Second, make sure that the electricity to the refrigerator is not being cut off by inspecting the circuit breaker or the fuse box. When the power supply is disrupted, the display cannot function correctly.

In the third step, clean off the display with a dry, microfiber cloth.


As we’ve seen, there are a variety of possible reasons why the Frigidaire Gallery refrigerator display can be malfunctioning.

If you’re experiencing this issue, it’s important to troubleshoot the problem and find the source. After determining what is causing your refrigerator to malfunction, you will be able to take measures to repair it.

Ideally, this guide has given you some insight into the possible causes of the issues with your refrigerator and give you a place to start fixing them.

How useful was this post?

Click on a star to rate it!

Average rating 3.2 / 5. Vote count: 22

No votes so far! Be the first to rate this post.

Avatar of Luis

I am a professional appliance repair expert and write articles that help average users diagnose and troubleshoot their kitchen gadgets, like microwaves, dishwashers, etc. I’m a foodie by heart and love reviewing food recipes, ingredients, and the cookware products used in them for meal preparation.