Fingerprints have a way of robbing the sheen of your kitchen stainless steel. Wiping them off with a dry cloth doesn’t seem to get the job done.
It is why you go for fingerprint-resistant stainless steel. The matte coating on these kitchen wares requires extra care when cleaning.
Knowing how to clean fingerprint-resistant stainless steel in the kitchen is, therefore, necessary.
Still, the good news is that fingerprint-resistant stainless steel requires less maintenance than regular stainless steel.
This informative guide will show you just that.
How To Clean Fingerprint Resistant Stainless Steel In Kitchen – What You Need
Fingerprint-resistant stainless steel, also known as smudge-proof steel, is a type of stainless steel that has been treated to make it less susceptible to fingerprints and smudges.
Even though they are more durable than other types of coatings, they still require some maintenance to keep them looking good and lasting longer.
There are a few Dos and Don’ts for cleaning solvents for these wares. You cannot use all cleaning agents when cleaning fingerprint-resistant stainless steel in your kitchen.
Here are a few that works best.
Baking Soda Cleaner
This cleaning solution comes in a powdery form. The powder has a smooth texture.
This smoothness makes it easy to use on stainless steel without scratching the surface.
Degreaser
Asides from removing grease, the degreaser also removes stains from stainless steel surfaces. It causes no harm or irritation to the skin or exterior.
Mild Soap
A mild soap removes stains from kitchen stainless steel without causing any harm to the surface.
Glass Cleaner
When choosing this type of cleaning agent, ensure it doesn’t have ammonia (a colorless gas with an irritating odor that can cause skin burns).
Microfiber Cloth
A microfiber cloth is a non-abrasive tool that makes cleaning easy. It is usually thick enough to absorb water and clean dirt.
Water
The water you mix with your cleaning solution should be lukewarm. If you use cold water, it will make the cleaning agent less efficient.
If you use hot water, it won’t be easy to dip the kitchen towel.
How To Clean Fingerprint Resistant Stainless Steel In Kitchen – What You Shouldn’t Use
You don’t just use any material or tool you find to clean stainless steel. Some do not work well on stainless steel surfaces in the kitchen and can cause extreme damage if used.
1. Bleach
Bleach is very toxic to surfaces because it is corrosive. Its aggressive nature reduces the quality of the stainless steel and makes it look dull.
Aside from that, it scratches the surface and makes it easy for stains to stick to.
2. Steel Brushes
When you use a wet cloth to clean stains off your kitchen stainless steel, the iron teeth scratch the surface and make it easy for rust to form.
3. Scouring Powder
Scouring powder is a mixture of detergent and abrasive powder. If you use this cleaning solution to clean your stainless steel surface, it will scratch the surface.
4. Highly Concentrated Detergent
Using a highly concentrated detergent to wipe the stainless steel surface in your kitchen could cause damage. Detergents contain harmful chemicals that can damage the stainless steel surface.
Step-By-Step Process
These steps are versatile. You can apply them on any stainless steel surface in your kitchen – your stainless pots, refrigerator, sink, kettle, plates, etc.
Method 1 – Glass Cleaner Kitchen Cleaning Solution
- Ensure your glass cleaner does not contain ammonia because it can easily damage the stainless steel surface.
- Get a clean bowl and pour in warm water.
- Put three drops of your glass cleaner on the surface of your microfiber cloth.
- Use the part you added to the glass cleaner to clean the stainless steel surface that has fingerprints on it.
- Next, soak your clean microfiber cloth in and allow for three minutes.
- Pick it out and begin to wipe the surface again.
- After cleaning the entire surface, dip another clean microfiber cloth into another bowl of warm water without a glass cleaner. This part is the rinsing stage.
- Finally, use a dry microfiber cloth to wipe off the water on the stainless steel surface.
Method 2 – Mild Soap Kitchen Cleaning Agent
- Get a bowl of warm water.
- Put the mild soap inside and shake slightly to make it foam.
- Dip the microfiber cloth inside, pull it out, and squeeze out the water a little.
- Use a wet cloth to clean the stainless steel surface.
- Once done, dip another microfiber cloth inside another bowl of warm water that’s not soapy. Then, use it to wipe the surface.
- Use a dry cloth to dry the surface.
Method 3 – Degreaser Cleaning Solution
- Put drops of the degreaser on your microfiber cloth, then use it to clean the stainless steel surface at intervals(put a little drop and clean, then put another drop and clean till you’ve completed the process.
- Dip the cloth into a bowl of warm water. Take it out and squeeze the water, then use it to wipe the surface.
- If the stains do not go, apply the grease again and wipe. (ensure not to put the grease directly on the stainless steel surface).
- Once the entire surface is clean, dip the microfiber cloth into non-grease warm water, then use it to wipe the stainless steel surface.
- Finally, use a dry cloth to dry the exterior.
Method 4 – Baking Soda Kitchen Cleaner
Cleaning your kitchen stainless steel with baking soda is preferred if the stain is tough (mostly oil stain). For this process, you won’t use a microfiber cloth but foam.
- Wear gloves to protect your hands.
- Wet the stainless steel surface with water to enable the baking soda cleaner to stick.
- Sprinkle the cleaning soda on the wet surface, then use the foam to scrub.
- Next, dip the foam into a bowl of warm water and use it to wipe the surface.
- Repeat the process till the fingerprint is gone.
Method 5 – Vegetable Or Olive Oil Cleaning Agent
- Wipe the stainless steel surface dry.
- Dip your microfiber cloth into a bowl of warm water.
- Apply the vegetable or olive oil to the dry stainless steel surface, then use the wet microfiber cloth to wipe the surface.
- Mix mild soap into the bowl of warm water, then dip in the cloth and use it to clean the stainless steel surface.
- Get warm water. Dip in the wet cloth, and use it to wipe off the soapy surface.
- Dry the surface.
A tip: Dust will stick to stains more easily on fingerprint-resistant surfaces, so try not to let the dust settle on them for too long! Wipe down surfaces.
How To Clean Fingerprint Resistant Stainless Steel In Kitchen – Wrap Up
Stain on your stainless steel wares makes your kitchen look untidy, and no one wants that. It’s essential to keep your new kitchen combination clean and fresh.
You can maintain the sheen in your kitchen with a bowl of water, mild soap, and a microfiber cloth.
